|
Gauge maintenance and regular safety check focus
Pressure is a common class of instruments measuring instruments, widely used in various fields. It visually shows the pressure changes in all aspects of the process, insight into the product or process conditions for the formation of the media, monitoring the safety of production trends during the operation, and chain or through automatic sensing devices, has built a fast and reliable security, To prevent accidents, protect the safety of persons and property played an important role, called security "eyes."
However, in actual production and living, the gauge there is neglect or illegal use of, to the safety and security. Main features are:
First, the installation configuration is not standardized. Current standards and regulations in the configuration of the gauge, installation, use, maintenance, and inspection requirements are clearly defined. The actual assembly, reducing the secondary site or dual (multi) set at the table only a few monitors, disk diameter and the range is not suitable for work requirements, flammable, explosive, toxic, corrosive environment, and other special conditions, the use of special instrumentation, free to change the specification of the situation highlights.
Second, the routine use of maintenance neglect. Use from time to time to check, clean, non-usage records, and the presence of hands or fluctuations in serious non-zero bit, explosion-proof protective film off the hole, corrosion or broken glass, dial, the dial is not clean and so on.
Third, the detection test work is not implemented. Gauge test cycle is generally six months. Mandatory testing is to protect the pressure gauge technical performance, reliable, accurate and value transfer, and effective legal measures to ensure safety in production. Some use the unit as the security role of the gauge do not know the place, do not apply for certification in advance, super test cycle used is rampant, especially the new pressure gauge must be purchased after passing through the test installation, but the new table with the approval rate for the first very low.
Compared with the production system pressure gauge is too small, the gauge itself, there is no danger. But the pressure gauge as the main body, to automatically interlock, sensing devices, protection devices relying on the tiny subtle perception of the visual, the security architecture of the fortress of other irreplaceable. "East Long Beach, ulcer in the colony." Contempt and lack of detail is for the safety of blasphemy. As an annex to gauge security, not just a few pressure digital display, it uses clever "eyes" to monitor a shred of "drain hole", always watching over product safety, personal safety, environmental safety gate. Especially for use in flammable, explosive, toxic material production, storage, transportation and other dangerous places, the stress factors on the prevention of catastrophic accidents play a key role. Gauge the contribution to security should not be overlooked.
Use a good pressure gauge is the responsibility of each security workers. First, the use of units to continuously improve the safety awareness, sense of responsibility to manage the use of the real characteristics of a good gauge to play the "eyes" of the role; Secondly, testing institutes and the test gauge should be actively doing the work, timely degradation , scrapped test does not meet the requirements of the pressure gauge to ensure that value is accurate, reliable performance; again, supervision departments should strictly regulations, regulatory requirements, to focus on monitoring pressure gauge in use violations, investigate and punish violations, unlawful use of behavior . Let us start from the details, from the basics, polish safe "eyes", Long Beach together to build a solid security
|
