| Information: I. Features:
1 pressure gauge with switching devices, visual indicators on or off position, arbitrarily set to a single alert or warning.
2 the use of magnetic contacts, pressure changes applied to places, to avoid frequent switching electrical contacts and damage equipment.
3 sealed construction and stainless steel products with anti-corrosion properties of acid-base `.
4 special material inside the machine and Baden tube, durable service life, precision accuracy.
II. Manufacturing specifications:
1 Model: AT-100M / M `BD-100M / M, AT-75M / M` BD-75M / M, AT-63M / M `BD-63M / M
2 types: vacuum gauge manometer `` Union into account.
3 Nominal size: 100mm, 75mm, 63mm.
4 Housing: stainless steel AISI 304 or ABS shell, to provide vertical and submerged.
5. Baden tube: stainless steel AISI 316.
6 of machine: stainless steel AISI 316.
7 connector part: copper or stainless steel AISI 316,1 / 8 ", 1 / 4", 3 / 8 ", 1 / 2", NPT `PT` PF.
8 terminals: general type. (Can also select the multi-connection power box).
9 contacts type: upper (A) `lower (B)` on the upper (AA) `next lower (BB)` upper and lower limits (AB).
10 Accuracy: ± 2.0% FS (electric contact action), ± 1.5% FS (electrical contacts are not action).
(According to American National Standard ANSI-B40.1 `1985 enacted standards)
11 scale units: Psi `Bar` Kpa `Kg/cm2 and other units.
(Single scale or dual scale)
III. Electrical Characteristics:
1 voltage operating range: 250V (MAX)
2 Start current: 1.0A (MAX)
3 interrupt current: 1.0A (MAX)
4 permanent current: 0.6A (MAX)
5. Outage capacity: 30W50VA (MAX)
IV. Note:
1. Carefully choose the right gauge model (with industrial or petrochemical industry).
2 depending on the operating conditions selected (more than one warning `alerts).
3. Applications include (indicating switch inductive detector `` `micro-pneumatic detector switch, etc.).
V. Selection Guide:
Normal pressure gauge: for measurement of copper and copper alloy non-corrosive gas and liquid pressure, and pressure control can be used directly, measure no crystal, no precipitation, no risk of explosion pressure of the fluid medium.
Oil-filled (seismic-type) pressure gauge: used to measure copper and copper alloy non-corrosive, explosive, and not crystalline, non-precipitation of gas or liquid pressure. The greatest feature of the product is in severe shock to the machine or equipment in the normal manometry. Seismic rating of VH4 and intense vibration measurement VH5 apply medium pressure pulse frequency of the place, for a long time in a working state of the machinery and equipment pressure.
Vacuum pressure gauge: measuring static pressure, copper and copper alloy non-corrosive, non-explosive, non-crystal, gas or liquid does not precipitate a negative pressure.
Pressure vacuum pressure gauge: measuring static pressure, copper and copper alloy non-corrosive, non-explosive, non-crystal, gas or liquid does not precipitate the positive and negative pressure.
All stainless steel pressure gauge: measuring no risk of explosion, there is a certain corrosive, non-freezing or crystallization of the fluid medium pressure.General electric contact pressure gauge can be alternative.
Oil-filled stainless steel type (seismic) pressure gauge: measuring no risk of explosion, there is a certain corrosive, non-freezing or crystallization of the fluid medium pressure in severe vibration of the machine or equipment in the normal manometry. General electric contact pressure gauge can be alternative.
Diaphragm pressure gauge: measuring non-explosive, medium pressure pulse frequent, long in working condition, has some corrosion, solidification or crystallization of the fluid medium pressure.
Piezoelectric pressure gauge: mainly used in level measurement KPa pressure, measured non-corrosive to copper micro-pressure and negative pressure, suitable directing 1Kg/cm2 weak gas below the liquid pressure.
.Quality Good
. Prompt Delivery
.’s Design and Logo
.Competitive prices
.Accept Small Order
.Accept the original design manufacturing ODM
.Accept the original commission OEM OEM |
