| Information: One. Diaphragm pressure gauge can be adapted to measure corrosive, easy to crystallize, easy to solidification, a solid floating animals and to avoid media pressure measuring type pressure gauge directly to the media and prevent sediment build-up, easy to clean the occasion.The measured (controlled) pressure system to achieve automatic control and signaling (alarm). The diaphragm pressure gauge is located on the lower two switching contacts device (contacts can be used three or four contact-type, according to the different control requirements can be different wiring) when the pressure reaches the set value signal or through off control circuit for the operating system with automatic control or sender.
II. Manufacturing Specifications:
1 mirror material: glass or PC.
2 Housing: 304 stainless steel shell or HCPP, electrophoresis iron, chrome, fluorine rubber, high chemical resistance, PP stability, good deformation temperature 130 ℃.
3 Fill fluid: glycerol (99.5%).
4 within the machine Material: copper alloy.
5 connector size and material: PP, erect or buried within the standard tooth 1 / 2 "PT/1/2" NPT.
6 measuring devices and materials: brass pipe Baden, fluorine rubber or Teflon diaphragm, VITON <25kg/cm2 (bar) C-tube.
7 panel material: aluminum, white with black font.
8 pointer Material: aluminum, black.
9 Diaphragm materials: fluorocarbon rubber or Teflon material.
Three. Characteristic table
|
Serial Number |
AT75-PP-AB |
|
Pressure range |
0 ~ 0.5 KG, 1KG, 2KG, 3KG, 4KG, 5KG, 7KG, 10KG, 15KG, 25KG, vacuum-0.1MPA ~ 0 |
|
Standard size |
63mm, 75mm, 100mm |
|
Accuracy |
± 1.5% |
|
Temperature range |
Max operating temperature 60 ℃ (in consideration of transmission characteristics), the ambient temperature of about -20 ℃ ~ 60 ℃ |
. Quality
. Prompt Delivery
.’s Design and Logo
.Competitive prices
.Accept Small Order
.Accept the original design manufacturing ODM
.Accept the original commission OEM OEM |
